Key Takeaways
- Recalls apply to serial ranges, so a list of model numbers alone cannot tell you whether your dishwasher is affected.
- The rating plate on the edge of the open door carries both numbers — photograph it rather than copying it by hand.
- Check those numbers against the official US recall database and the manufacturer lookup, not against forum posts.
- If your unit is affected, stop using it and follow the published remedy; an independent repair can complicate a free one.
- Registering the appliance means a future notice reaches you instead of depending on you searching at the right moment.
The Bottom Line
Find the plate on the door edge, photograph the model and serial, and check those two numbers against the official database. That is the only recall answer that is genuinely about your dishwasher.
Searching for an LG dishwasher recall list and reading whatever comes back is the wrong way round, and it is why so many owners end up either falsely reassured or needlessly worried. Recalls are not issued against a brand or even against a model name on its own. They are issued against a range of units, and the only thing that places your machine inside or outside that range is the pair of numbers printed on its rating plate.
| Where to look | What you find there | Why it matters |
|---|---|---|
| Edge of the open door | Rating plate with model and serial | The only authoritative source for your unit |
| Inside the door panel, upper corner | Same plate on some builds | Position varies by generation |
| Side of the tub, visible when open | Secondary label | Useful when the door plate is worn |
| Original paperwork or receipt | Model number, purchase date | Narrows the manufacturing window |
| Your online account or registration | Registered serial number | Notices reach you without searching |
Two Numbers, Not One
A model number describes what the dishwasher is: the feature set, the tub, the control layout. A serial number describes which one it is and, encoded within it, roughly when and where it was built. A recall almost always applies to units built during a specific window, because that is when the defective component was fitted on the line.
This is the part that gets skipped. Two dishwashers can carry the same model number on the door, be identical in the showroom, and only one of them falls inside the affected range. Reading a list of model numbers and stopping there gives you an answer that may simply be wrong for your machine.
It cuts the other way too. Owners sometimes see their model name in a headline, assume the worst, and replace a machine that was never within the affected window at all. The plate settles both questions in about a minute, and it is the only document in the house that describes this particular dishwasher rather than a product line.

Finding the Plate Without Guesswork
Open the door fully and look along its inner edge, the narrow face that meets the tub when the door is closed. On most LG dishwashers the plate is there, running horizontally. If it is not, check the upper inside corner of the door panel and the side wall of the tub.
- Photograph it, do not transcribe it. Serial numbers mix letters and digits that are easy to misread, and one wrong character produces a confident wrong answer.
- Copy the model number in full. Trailing suffix letters distinguish finishes and production revisions and are part of what a recall notice specifies.
- Do not rely on the display panel. The badge on the front tells you the range, not the individual unit.
- Keep the photo somewhere permanent. You will need the same two numbers for parts, warranty, and any future notice.
Where the Answer Actually Lives
With both numbers in hand, check them against the official United States recall database maintained by the Consumer Product Safety Commission, and against the manufacturer's own recall lookup. Those two sources are authoritative; forum threads and aggregator sites are not, and they are frequently out of date in both directions.
Our own record of the campaign affecting some LG dishwashers is on the LG dishwasher water leak recall notice, which sets out what the defect was and what the remedy involved. Use it to understand the issue, then verify your specific unit against the official sources rather than assuming a match.
What to Do With the Machine Meanwhile
If your unit turns out to be affected, stop using it and follow the remedy in the notice. Do not attempt a repair yourself on a recalled appliance: the remedy is free to the owner, and an independent repair can complicate or void it.
If it is not affected but the machine is behaving badly, treat leak symptoms seriously in their own right. A dishwasher posting the AE leak-detected code has found water where water should not be, recall or no recall. Water on the floor, a damp cabinet base, or a burning smell from under the machine all warrant switching it off at the breaker and having it looked at.
Getting Told Instead of Searching
The reliable way to learn about a future campaign is registration. A registered appliance generates a direct notice to the owner; an unregistered one relies on the owner happening to search at the right moment, which is how recalled machines stay in kitchens for years.
Registration takes the same two numbers you have just photographed. If you bought the dishwasher secondhand or inherited it with the house, register it anyway — the notice follows the unit, not the original buyer. Our guide to LG dishwasher safety risks covers the everyday hazards that no recall list will ever mention.
When You Want Someone to Look
If you cannot find the plate, cannot read it, or are not sure whether a symptom is a recall issue or ordinary wear, that is a reasonable thing to ask a technician. Our LG dishwasher repair service starts with a diagnosis of what the machine is actually doing, which is the part an online search cannot give you.
- Open the door and photograph the rating plate.
- Check both numbers against the official recall database and the manufacturer lookup.
- If affected, stop using the machine and follow the published remedy.
- If not affected but something is wrong, have the symptom diagnosed on its own terms.
Dishwasher service starts from $89, with the final price confirmed after the on-site diagnosis and a written estimate before any work begins. You can book a visit or send us the model and serial and we will tell you what we can see from here.